Version 2.13 (2/06/2008):

This is a bug fix release.

A boundary condition bug was found in Picky during a recent internal Picky data structure dump for sample data gathering. This bug can be triggered ONLY when designing fixed length oligos, i.e., when the maximum and minimum oligo length input parameters are the same. This bug causes suboptimal fixed length oligos to be chosen by Picky.

Since the Picky author and his collaborators never designed fixed length oligos, this bug was not uncovered earlier and may have been in Picky since its first public release. We apologize for this inadvertently overlooked bug and the inconvenience it may have caused.

If you have never designed fixed length oligos, i.e., if your maximum and minimum oligo length parameters are not the same as we have always recommended for general Picky usage, then you are not influenced by this bug and your previous oligos are all OK.

If you have however designed fixed length oligos using Picky, your oligos might not be of high quality and you should redesign them. If you have already synthesized these oligos, we suggest you to use the new Oligo Examination feature in Picky to check how many of your previous oligos are still usable. You can replace the unsuitable ones with newer oligos designed with Picky 2.13 or later.

In all cases, we recommend upgrading to this new version 2.13.

Version 2.12 (11/08/2007):

Updates in this release are all related to third party oligo check.

1. Fixed the problem that duplicative oligos can be displayed when unknown oligos in a third party oligo set exceeds 65536, causing the oligo index to wrap back to the first oligo, thus the duplicates. This limitation has been removed now.
2. Generalized oligo probe display so each oligo base can now assume different color. This is to cope with the fact that third party oligos may overlap each other, and may also be nonspecific (black), unique (blue) or shared (green). Picky can now display multiple colors on the same oligo to indicate that it is overlapped by other oligos in the same oligo set and on the same target gene region.
3. Picky now also reports unique third party oligos that happen to target uncertain (e.g., N base) regions in their target gene sequences. These bases were converted to A in Picky but were marked to be uncertain by a red color.

Version 2.11 (10/30/2007):

Minor usability and bug-fix improvements.

1. Fixed a bug related to unknown probe information display in the status bar, which may lead to a crash. This is a GUI bug so it does not change the computed outcomes in Picky 2.10.
2. Moved the new version check code to run inside a secondary thread so it does not block the GUI response, especially when your networking is slow or unreachable.
3. Added the new features summary to version check result window.
4. Displayed "Picky spinning" icon also during 3rd party oligo examination.
5. Used g++4 to recompile the Linux Picky and gained moderate speedup.

Version 2.1 (10/13/2007):

New Features

1. Examination of oligo sets. In addition to designing its own oligos, Picky 2.1 now allows you to load existing oligos and examine their thermodynamic properties against the input gene sets. There are many important use of this new feature: to check 3rd party oligo designs, to map your existing oligos against newly annotated gene sets, to determine PCR primer specificity, etc. Loaded oligo sets will be checked using the same rigorous thermodynamic computations offered in Picky, and will be identified by the magnifying glass icon to separate them from Picky's own oligo designs. The input oligo file can be in almost any plain text format as long as Picky can identify DNA sequences in the file. Picky uses its maximum and minimum oligo size parameters to determine if a DNA fragment found in the input should be considered a valid oligo, therefore you should set these two parameters to reflect your oligo size range.

2. Multiple oligo sets. You can now design or examine multiple oligo sets against the same input gene sets at the same time, without having to discard the previous oligo set. Picky now holds multiple oligo sets, both designed and examined by it. You can continue to double-click each oligo to see its probe target region overlaps view, but note that the temperature estimations reported in the overlaps view (see 8 below) will always be based on the current set of oligo parameters because they are dynamically recalculated, and thus may not match the temperatures reported in the oligo panels if they were designed or examined using a different set of parameters.

3. Oligo selection range. By popular demand, a new pair of range limit parameters now allow you to specify a range, say, the last 500 bp on the 3'-end of each input gene sequence, to select its oligos. Read the automatic help text in the Oligo Design Parameters dialog to learn more about how to use these two parameters.

4. Nonlinear salt effect equation. Picky 2.1 now offers two different salt effect equations, the original linear salt effect equation which is not sequence content dependent (SantaLucia et al., Biochemistry 35:3555-3562, 1996; also see Chou et al., Bioinformatics 20:2893-2902, 2004), and a nonlinear salt effect equation which is sequence content dependent (Owczarzy et al, Biochemistry 43:3537-3554, 2004). At lower salt concentration (e.g., less than 500mM NaCl), the nonlinear equation gives better prediction of the oligo melting temperatures, though at higher salt concentrations both equations converge to the same predictions at 1M NaCl. The nonlinear salt effect equation takes longer time to compute thus it may not be necessary if your hybridization buffer salt concentration will be higher than 500mM.

5. Shared oligo preference. You can now specify that you prefer shared oligos during the redundant oligo removal in Step 6 of Picky's processing. Redundant oligos are extra oligos for the same gene sequence. For example, if you have both a shared oligo and a unique oligo targeting the same gene, and you only asked for one oligo per gene, the shared oligo will be chosen and the unique oligo will be discarded if you choose this preference option. The default is to keep the unique oligo; the shared oligo may or may not be retained depending on whether its other target(s) have their unique oligos.

6. Oligo candidate reevaluation. During oligo candidate selections (Steps 3 and 5 in Picky processing), an extra new step has been added to recalculate their melting temperature properties from the perspective of the oligo candidates themselves. Previously, the temperature calculations were whole sequence based and may not provide the most precise local oligo property estimations. This extra step adds about 5% processing time to Picky but removes the chance of selecting non-optimal oligos under rare conditions.

7. Mac native Picky! Thanks to upgrades made by the authors of the wxWidgets cross-platform GUI toolkit based on which Picky's user interface was built, we can now offer a Mac native Picky solution, which is a universal binary program for both Intel and PowerPC Macs running Mac OS X 10.3.9 or later. Mac users, forget about X11!

8. Temperature sorted overlaps view. When double-clicking a probe either in the probe panels or on a sequence where it is identified by a blue or green color, a probe target region overlaps view will be shown. Previously, this view is sorted based on sequence overlap weights just like the other two overlaps views: the whole sequence longest overlaps and the whole sequence all overlaps views. Now in Picky 2.1, it is sorted based on the estimated melting temperature of each nontarget with the double-clicked probe, thus it is much easier to identify potential troublesome nontargets. However, note that the temperatures in this view were dynamically recalculated based on the current set of parameters, and they may not match the temperatures reported in the probe panels if they were calculated using a different set of parameters earlier. See 2 above.

9. Computing the suffix, invert and lcp arrays only once. If you did not change the input gene sets, or flip the single or double strand screening parameter, Step 1 and 2 of Picky computation will not be repeated anymore to speed up Picky processing significantly. This is especially beneficial now that multiple oligo sets can be easily designed, each with maybe just a slight change of parameters.

10. Relaxation of many parameter limits. In order to give users a greater application of Picky beyond oligo microarray designs, we now expanded several allowable parameter limits in Picky 2.1. For example, oligo size can now range from 20 to 100 bp long, and the minimum temperature difference can even be set to zero. The latter case is useful for oligo examination. Basically the temperatures will be ignored by Picky and it will behave simply as a sequence matching tool aligning your input oligos against the gene sets.

11. Automatic break up of long input sequences. This version of Picky has a sequence length limit of 16384 bp. This is more than enough for typical gene sequences, but may be too short for genome tiling applications. Previously users need to break up their long input sequences before loading them into Picky. Picky 2.1 can now automatically break up long input sequences into multiple parts and assign coordinates as part of the gene names. The breakup by Picky 2.1 is nonoverlapping; for more sophisticated overlapping breakups, use the enclosed break_up.pl Perl program.

12. Lots of display, user interface and auxiliary features updates: You can now check the availability of new Picky versions within Picky itself, under the Help menu; The sequence and coordinate indicators were changed to a small green dot to avoid obscuring reading sequence names on certain platforms; Designed oligo sets will carry a time stamp title, but will be automatically updated to the file names they are saved into; To accommodate multiple loaded oligo sets in Picky 2.1, the input sequence sets Will be repainted dynamically using the last "clicked" oligo set and the Picky processing window will reload its saved processing message; Finally, the overall stability and user experience has been greatly improved with Picky 2.1. Enjoy and good luck with your research!

Version 2.0 (6/07/2005):

New Features

1. Shared oligo design. Picky 2.0 can now design oligos for very similar genes, e.g., gene family members that cannot have unique oligos designed for them using the previous Picky 1.1. This new feature helps to identify gene family activities even when some gene family members cannot be individually recognized. For large genomes, this often make many more genes possible for microarray detection, even not individually. The shared oligos designed by Picky 2.0 carry a green color in the Oligo Probes panel while the individually designed oligos are still in the blue color.

2. New output file format. To accommodate the new shared oligo design feature, the .picky output file has a slightly different new format as indicated by the column headings in its first header line. The .report file also now contains information on how the shared oligos are selected.

3. New overlap views. You can now double-click any sequence anywhere you see in Picky's various interfaces to launch an overlap view window. There are three types of overlap windows. If you double-click within a green or blue oligo target region of a sequence, a detailed all overlaps view only on the oligo target region window will pop up. If you double-click on the other regions of a sequence not chosen as probe targets, you will get a general longest overlap view window for the whole sequence you just double-clicked. Finally, if you wish, you can double-click the upper-left hand corner in an already opened overlap window of any flavor to get an all overlaps over the whole sequence overlap view window, which can be quite heavy if you have a large input gene set, but it does show you everything Picky has seen when it selected its oligos for that particular sequence you are viewing.

4. Click-to-view feature. Also now when you double-click a sequence as described above to get its overlap views, the place where you just double-clicked will be pulled into view when the new overlap window pop up. This works both for the detail probe region all overlaps view or the whole sequence longest overlap view, but not the all overlaps for the whole sequence view. This helps you quickly compare sequence regions to other sequence regions by "jumping" among their overlap view windows.

5. Lockable dynamic alignment. Previously in Picky 1.1 you can move your mouse around Picky overlap windows to see some dynamically generated alignments of a target sequence with its various nontargets. If you move the mouse away from any detected exact match fragment, the alignment will quickly disappear. People are often interested in seeing the alignment beyond the window size, especially when two sequences are very similar or have long stretches of very similar regions. You can now click on a nontarget fragment to lock its alignment view. This way, you can scroll back and forth without losing your alignment. This new feature essentially makes Picky a very handy dynamic multiple sequence alignment tool. To unlock the alignment, simply click on any white area of your screen or on another nontarget fragment to lock another alignment.

6. Scrolling with ease. You can now use your keyboard navigation keys to scroll Picky window views. You can use the up, down, left, and right arrow keys to scroll a few lines or base positions gradually, or you can use the Home, End, Page Up and Page Down keys to scroll much faster vertically. Finally, if you have a mouse with a rotation wheel, you can also use that to scroll Picky's window content. Note that on Windows you need to click on an window to get the keyboard focus to it before you can scroll its content with keys or the wheel on your mouse.

7. More precise nontarget melting temperature estimation. Picky 2.0 has a newly improved nontarget melting temperature calculation module which takes boundary conditions into consideration when checking for possible cross-hybridizations, e.g., those sequence region matches that occurred at the very end of one another. This new module is also slightly more efficient than the previous one.

8. Improved color schemes. Subsequent experience on various computer screens and LCD panels allows us to fine-tuned Picky's display colors to better illuminate its computed findings to users. The new color scheme used in this new version should make it much easier to identify the two types of probe target regions and the extent of similarity match of any sequence region to the other sequences.

9. Expanded maximum total sequence limit. Previously in Picky 1.1 a maximum total of 65,532 input sequences can be loaded into Picky at once. This limit has now been lifted. However, the physical memory size limit, the two gene set limit, the maximum 16,384 bp sequence length limit, and the 65,532 per gene set sequence limit still hold. Normally, it is your physical memory size that is the real limiting factor on the maximum gene set size you can process on your computer.

10. A utility to chop long input sequences is included in this release. When loading input sequences, if you see Picky complains that some input sequences are longer than its 16,384 bp limit so it cannot load them, you can use the include Perl script "chop.pl" to break long input sequences into multiple fragments with the same sequence name to allow Picky to process them. Note that the side effect of this script is that you may have multiple oligos designed for some long sequences even if you just ask for one oligo design per sequence. You can modify the script so it may name each sequence fragment differently so you can then filter out those extra oligos. PC users can download ActivePerl to enable the execution of this Perl script <httpd://www.activeperl.com>.

11. Various user interface improvements and minor bug-fixes.

Version 1.1 (04/26/2004):

New Features: 1. Picky now takes sense strand input sequences. We changed it because it is more common to maintain gene sequences in the sense strand direction. 2. Dynamic overlap displays, both the general view and the detail view, now displays a local alignment up to the similarity level set by the users during the oligo computation. Additionally, in the detail oligo target region view a projected hybridization temperature of each nontarget with the probe are shown.

Version 1.0 (03/12/2004):

First public demo released.